1.INSTALL THE BRIDGE/ADJUST THE STRINGS
If the strings are loose when you received, you need to adjust it. Please loosen the strings slightly , and slide the bridge to the below of the strings .( Don't make it too tight, since the strings are easy to break).
2.ADJUST THE BOW ROD
The correct tightening principle is the spacing between the bow hair and the bottom of the bow rod is just the thickness of pencil.
Note: inorder to reduce the effects of sweat, the neck is without paint.
How to Choose Violin Size
Violins have different sizes as 4/4, 3/4, 1/2, 1/4, 1/8.
-4/4 = Full Size, Age 12 yrs+ to adult with an arm length of 23.5 and up
-3/4 = Age 10-11 yrs old with an arm length of 22 to 23.5
-1/2 = Age 8-9 yrs old with an arm length of 20" to 22"
-1/4 = Age 6-7 yrs old with an arm length of 18" to 20"
-1/8 = Age 4-5 yrs old with an arm length of 17.1" to 17.5"
FEATURES:
1. Suitable for kids who are Age 12 yrs+ to adult
2. 4/4 size
3. The head, back and sides of this acoustic violin are all made from
basswood
4. The fingerboard, tailpiece, pegs, and chin rest are made from
plastic
5. Color: Blue
6. The bow is made from arbor and white horse
tail
7. This set includes violin, case, bow and rosin
8. The inside of
case is very soft to protect the violin
9. Rosin is a free gift
SPECIFICATIONS:
1. Viola Bridge Material: Maple
2. Weight: 48.18oz / 1366g
3. Size: 4/4
4. Rosin Dimensions: (1.89 x1.22 x 0.63)" / (4.8 x 3.1 x 1.6)cm (L x W x H)
5. Panel Dimensions: (14.02 x8.27 x 2.76)" / (35.6 x21 x 7)cm (L x W x H)
6. Bow Length:29.13" / 74cm
7. Violin Dimensions: (23.43 x8.27 x 2.76)" / (59.5 x21 x 7)cm (L x W x H)
8. Case Dimensions: (31.30 x10.04 x 4.72)" / (79.5 x25.5 x 12)cm (L x W x H)
9. Back Material: Basswood
10. Side Material: Basswood
11. Face Material: Basswood
12. Tailpiece Material: Aluminium Alloy
13. Top Material: Maple
14. Chin Rest Material: Blacked Wood
15. Tuning Peg Material: Blacked Wood
16. End Pin Material: Blacked Wood
17. Violin Bow Material: Arbor
PACKAGE INCLUDES:
1 x 4/4 Acoustic Violin + Case+ Bow + Rosin
Note:
1. When you receive the violin, please notice that the bridge is wrapped in paper and stowed underneath the tailpiece. Don't discard it. It should be installed in the middle of the two F Holes.
2. When you receive the bow and the hairs are loose, don't worry. Use the screw to tighten the frog so that the hair has tautness.
3. When you find that part of the bow hair is broken, it is normal, please cut off the broken part and the bow can be used normally.
4. Be careful to not over tighten your bow. The hair should have a slight bounce to it without touching the stick after placing it on the strings. Usually about 1/4 of an inch distance from the low point of the curve to the hair is ideal.
5. Hold the rosin with your index finger and thumb, and thus tighten up the bow, evenly smear the rosin on the bowstring up and down. Suggested use: before smearing, rip a trace on rosin to make it powdery for quick and even smearing. Try to keep your hands away from rosin or pad with a tissue while smearing; otherwise it will become too sticky to clean.
6. If the string falls out, don't worry, it can be reinstalled, please consult customer service.
Specifications
by Elaine Toland, on August 22,2022
by Donna Bright, on July 07,2022
by Tony Walker, on June 15,2022
by Wendell Oscar, on May 19,2022
by Laura Nico(l), on May 01,2022
by Troy Eveline, on October 20,2021
by Chloe Blume, on October 20,2021
by Riva Congreve, on October 18,2021
by David Boyle, on October 18,2021
by Clarence Doherty, on October 17,2021